You are using your PC and suddenly your screen goes to the full black mode and you can not see anything on screen other than a cursor? Don’t Panic! This issue in Windows 10 is common and certainly curable.
These are some solutions that will help if you are facing Black screen with cursor issue.
Note: Before Trying , you may also chose to uninstall any third party software , after installing which this problem may have popped in to your PC. Many users reported that after installing few theming apps namely UXStyle,StartIsBack etc. this problem appeared. Once they uninstalled these apps, the problem got fixed.
Method 1 – Reset Project Screen settings
Most times this error happens because your computer can not determine that you are connected to an external display or not. You can change your project settings by the following process.
STEP 1 – While your computer is off, connect an external Display
STEP 2 – Turn on your PC and wait till it fully loads up.
STEP 3 – Invoke Easy Display Switcher by pressing Windows and P at the same time. Choose PC screen only option.
STEP 4 – Shut down the computer and disconnect the external screen.
STEP 5 – Start your computer and check that error is gone or not.
Method 2 – Uninstall your Graphics Card Driver
If you are struck in Black Screen mode you can easily tackle this issue by uninstalling your graphics card driver. Graphics card driver is the main culprit in this error. Multiple graphics driver is more prone to this error. Follow below step to know how to get out from a black screen and remove graphics card drivers.
STEP 1 – If you are on black screen, Press Ctrl + Alt + Del in order to start Task Manager.
STEP 2 – From the task manager we will able to start device manager window. Click on the file menu and select Run new task option.
STEP 3 – Type devmgmt.msc and press Enter. It will open Task Manager. If you are successful in opening device manager jump to step 4 otherwise read ahead.
If you are not able to open task manager you have to start your computer in safe mode. Follow this steps to start your computer in safe mode.
i) When your computer boots up, press F4 to access boot options.
ii) In boot options, Troubleshoot > Advanced Options > Startup Settings.
iii) You will now have options to start your computer in safe mode, choose safe mode with network.
iv) Press Windows + X and choose Device Manager to open Device manager.
STEP 4 – Locate your Graphics card from the devices list and choose Uninstall from right click menu.
STEP 5 – Click Uninstall to confirm.
Method 3 – Update your Graphics card
In case of many users, this issue is happened due to faulty or misconfigured graphics cards. This error can also happen if your computer has two different graphics drivers. Updating your graphics card driver can be easy solution for this issue.
You can download graphics card driver on your PC manufacturer website or graphics card website. Make sure that you are choosing right drivers for your computer while downloading them. Check for the error after updating your graphics card driver.
Method 4 – Turn off Fast Startup
STEP 1 – Open run box by hitting Windows and R at the same time. Type control and hit Enter. It will open control panel window.
STEP 2 – Click on Power Options.
STEP 3 – Click on Choose what power button do option on the left pane.
STEP 4 – Click Change settings that are currently unavailable link.
STEP 5 – You will see more options under shutdown settings now. Uncheck on Turn on fast startup (recommended) and click on save settings.
Method 5 – Reset your Computer
If none of the above methods worked for you then resetting your computer is the last option for you. Follow these steps to reset your PC.
STEP 1 – Press Windows + I to open settings. Choose Update and Security settings from the main menu.
STEP 2 – Choose Recovery from the left pane. You will see now Reset this PC option on the right side. Click on Get Started to start resetting your computer.
STEP 3 – Choose to Keep my Files (You can also choose to Erase Everything of you don’t want to keep your files).
I hope that you are able to solve this black screen with cursor issue with the help of these methods. If you have any query regarding these methods feel free to tell us in comments.